Proxy and Location Settings

Owned by Pavel Rad (Unlicensed)
Last updated: Feb 18, 2021
3 min read

Disclaimer: ProxyDroid and other proxy service providers are third-party service providers and are not part of AInsider. Therefore, AInsider cannot be responsible for the stability of the service and does not control its revision and pricing policy.

Important! The choice of the PROXY service remains with the end-user. ProxyDroid is just one of many possible options.

 

For most proxy services to work, you need to give root rights to the device on which the farm will run.

 

To do this, follow these steps:

  1. Go to the emulator settings

2. Go to "Other Settings" section and click Enable under Root Permission

 

After successfully granting Root rights on the emulator proceed to the next step.

Before you start configuring ProxyDroid, do not forget to purchase an individual IPv4 proxy SOCKS5. You can do this with any third-party seller.

 

Installing ProxyDroid

 

3. Download Proxydroid application to the emulator (for example, using this link https://proxydroid.en.uptodown.com/android) or download from the Google Play store

4. When you launch Proxydroid for the first time, select Remember choice forever and click Allow

5. In Proxydroid application select the type of proxy( in our case

Proxy Type SOCKS5), then enter IP address of the purchased proxy in Host and port number.

6. Click on Enable Authentication and enter User and Password data that was provided to you after purchasing Proxy.

 

7. After that enable the Proxy Switch slider

 

Proxy installation is successfully completed!

Location settings (Virtual GPS)

 

To avoid getting banned in Poker Rooms you’ll need to match out your IP between your PC and Emulator. To do this, follow these steps:

  • Activate the VPN server;

  • To test if VPN is working, launch an Internet browser on the emulator and open one of the sites to check the IP address (for example, https://2ip.ru or https://whoer.net);

  • After making sure that the VPN is working correctly, you need to match the selected location with the virtual GPS emulator:

Launch the emulator and open the GPS settings by clicking on the corresponding button on the LDPayer sidebar (or press Ctrl + 7):

 

In the upper left corner, enter the name of the city you are in according to https://whoer.net or find it manually on the map. Choose a suitable location (preferably a residential building):

 

 

Note: To avoid IP clustering (and consequential bans) choose different locations in the city

Each emulator needs to be configured once. When you close the emulator, the settings will be saved.