Installing and configuring AutoPlayer
| Info |
|---|
Disclaimer: AutoPlayer is an affiliate service and is not part of AInsider. Therefore, AInsider cannot be responsible for the stability of the service and does not control its refinement and pricing policy. |
AutoPlayer is a program designed to automate farm work using AInsider hints. It can be purchased from our partners. Please contact your manager for more details.
For the autoclicker to work screen resolution must be set to 1920x1080 and “Scale and Layout” parameters set to 100%. These parameters must be set either on a PC or on a remote server, depending on where you plan to use the autoclicker.
If you are using a remote cloud server then you can connect to it these ways: using Windows built-in RDP (Remote Desktop Protocol) utility or using the VNC service. If the screen resolution of your computer is 1920x1080, then a connection via RDP is sufficient (since RDP does not allow you to change screen settings. It uses settings of the computer from which the connection is made). If not, then you need to connect through one of the VNC services. In this case screen resolution settings will be available to you and you can select the necessary parameters.
| Info |
|---|
Please note that AutoPlayer may not support the latest version of LD Player. Please use ver. 4.0.31 which is available here: |
https://encdn.ldmnq.com/download/package/LDPlayer_4.0.31.exe.
Launch AutoPlayer;
Copy the Computer ID and send it to your manager in order to get the activation key from him:
| Info |
|---|
Note: sometimes an error occurs after inputting the key: |
| Info |
|---|
It is commonly solved by changing the internet access point or switching VPNs. If that doesn’t help please contact your manager. |
In the “Settings” menu type in the emulator .exe path. The default LDplayer path is C:\XuanZhi\LDPlayer. If the path was changed during the emulator’s installation please indicate the correct path.
This menu also includes decision delay settings for the bot.
Lastly, the required poker room is selected. Choose all necessary settings and press “Save”.
...
Press
“Start”;
After a successful auto-clicker installation you should see a red rectangle in the lower-left corner. Drag the hint inside this rectangle by pressing and holding left mouse button.
| Info |
|---|
Note: for the program to work correctly, it is recommended to place the hint in the lower left corner of the red rectangle. |
| Info |
|---|
Note:In case the red rectangle did not appear press “Stop” and then “Start” in the AutoPlayermenu. |
For the most accurate work of the autoclicker it is recommended to use the minimum font size and maximum bold.
You can customize the appearance of hints in the AInsider application by clicking on the "gear" symbol in the lower right part of the screen:
...
| Info |
|---|
Please note that the side panel of the LDPlayer needs to be open for the auto-clicker to function properly: |
Connecting to a remote server via VNC (for example, RealVNC).
| Info |
|---|
Disclaimer: RealVNC is not part of Eco-mini. Therefore, Eco-mini cannot be responsible for the stability of the service and does not control its revision and pricing policy. |
Visit the official RealVNC website: https://www.realvnc.com/en/.
At the top right of the screen, select “Sign In” and register a new account.
After logging into your account, select Products and then click VNC® Connect:
...
In opened window click Downloads, VNC® Connect:
...
Select the appropriate operating system and click Download VNC Server:
...
| Info |
|---|
Note: VNC Server must be downloaded to the PC which we are going to connect. |
Run the downloaded file and install VNC Server on your computer.
After installation, log in to the application using the username and password used earlier when you registered on the RealVNC website:
...
Next, come up with a Security VNC password that you will use when connecting via VNC Viewer (this password must be different from the one you use to log into your RealVNC account), click Next:
...
Now you will be asked to enter Computer name in team or leave the default option. This name will be used to search for a computer when connected to it via VNC Viewer:
...
Install VNC Viewer and log into the account created on the RealVNC website:
| Info |
|---|
Note: VNC Viewer must be installed on the PC from which you plan to connect: |
...
After entering the application select the computer on which you installed the VNC Server:
...
Enter previously created in the VNC Server password
...
Now after connecting to a remote server you can change the screen resolution and scale required for AutoPlayer to work.
Click on the right mouse button and select Display settings:
...
Select the screen resolution and text scale as shown in the screenshot below:
...